How to use electric water heater

2022-07-22
  • Detail

I believe that most families have installed electric water heaters, which has brought great convenience to our lives. How should we use the electric water heaters? Next, let's take a look at the use of electric water heaters

I believe that most families have installed electric water heaters, which has brought great convenience to our lives. How should we use electric water heaters? Next, let's take a look at the use of electric water heaters

how to use the electric water heater 1. Plug in the power supply, press the switch button of the electric water heater, and set the water temperature at the same time. Generally, I set it at 45 degrees. In winter, the temperature can be relatively higher

how to use the electric water heater 2. After the water is boiled, first adjust the valve to the middle position, put some water, and try to use it when the water temperature is not cold. (generally, the left side of the valve is marked with h for hot water, and the right side is marked with C for cold water. Hot water is marked in red, and cold water is marked in blue.)

how to use the electric water heater 3. Be sure to fill it with cold water before heating it. The tap water is required to be in a normally open state to ensure that the water tank is always full of water. To prevent scalding, open the cold water valve first, and then the hot water valve; When closing, close the hot water valve first, and then the cold water valve

how to use the electric water heater 4. It can be used after the water temperature is constant. Because there is water around the electric water heater, it is easy to get an electric shock. Therefore, try not to touch other places with your hands or other parts during use, especially around the power supply

how to use the electric water heater 5. When using the electric water heater, when the water valve is opened and there is no water, the power supply should be disconnected immediately to prevent the electric water heater from working without flowing water due to failure

how to use the electric water heater 6. If the water pressure or voltage is too low, it should be suspended

how to use the electric water heater 7. After using, turn off the switch on the electric water heater first, and then unplug the power after your hands are wiped dry

the above is the relevant introduction of the use method of electric water heater. I hope it will be helpful to you. More decoration information is available. Please look forward to it

南宁男科医院

温州男科医院

成都精神医院

Copyright © 2011 JIN SHI